Preparing The Computer - HP d325 Slim Tower Model Hardware Reference Manual

Hardware Upgrades
Removing or Installing DDR-SDRAM DIMMs
Ä
Ä
Ä
Ä
2-10
CAUTION: The memory module sockets have gold metal contacts.
When upgrading the memory, it is important to use memory modules with
gold metal contacts to prevent corrosion and/or oxidation resulting from
having incompatible metals in contact with each other.
CAUTION: Static electricity can damage the electronic components of
the computer or optional cards. Before beginning these procedures,
ensure that you are discharged of static electricity by briefly touching a
grounded metal object. Refer to
more information.
CAUTION: When handling a memory module, be careful not to touch
any of the contacts. Doing so may damage the module.

Preparing the Computer

1. If you have locked the Smart Cover Lock, use Computer Setup to
unlock the lock.
2. Exit all software applications, turn off the computer properly
through the operating system, then turn off any external devices.
3. Disconnect the power cord from the power outlet and disconnect
any external devices.
4. Remove the computer access panel and front bezel.
CAUTION: Check the position of all cables and wires before raising or
lowering the Easy Access drive bay to prevent damage.
www.hp.com
Appendix E, "Electrostatic Discharge"
Hardware Reference Guide
for