Installation Keep this instruction manual in a safe place for future reference. Should the appliance be sold, transferred or moved, make sure the instruction manual accompanies the washing machine to inform the new owner as to its operation and features. ! Read these instructions carefully: they contain vital information on installation, use and safety.
Washing Machine Description Control panel Detergent dispenser Detergent dispenser: to add detergent and fabric softener (see page 8). LEDS: to find out which wash cycle phase is under way. If the Delay Timer option has been set, the time left until programme starts will be indicated (see page 5).
LEDs The LEDs provide important information. This is what they can tell you: Delay set: If the Delay Timer option has been enabled (see page 7), once you have started the programme, the LED corresponding to the delay set will begin to flash: As time passes, the remaining delay will be displayed, and the corresponding LED will flash: Once the set delay is complete, the flashing LED will...
Starting and Programmes Briefly: starting a programme 1. Switch the washing machine on by pressing button All the LEDs will light up for a few seconds and the ONOFF / DOOR LOCK LED will begin to flash. 2. Load your laundry into the washing machine and shut the appliance door.
Personalisations Setting the temperature Turn the TEMPERATURE knob to set the wash temperature (see Programme table on page 6). The temperature can be lowered, or even set to cold wash ( ). Setting the spin speed Turn the SPIN SPEED knob to set the spin speed for the programme selected.
Detergents and Laundry Detergent dispenser ! Do not put any items into the drawer, other than detergents designed to be released from the drawer, as they may cause damage or blockage. Dispensing powder detergent To achieve the best wash results the manufacturer’s recommended amount of detergent should be measured and added to the main detergent compartment.
Environmentally-friendly technology If you only see a little water through your appliance door, this is because thanks to the latest Indesit technology, your machine only needs less than half the amount of water to get the best results: an objective reached to respect the environment.
Care and Maintenance Switching off the electricity • Turn off the water tap after every wash. This will limit the wear of your appliance’s water system and also prevent leaks. • Unplug your appliance when cleaning it and during all maintenance operations. Cleaning Cleaning the exterior Use a damp cloth or silicon polish to clean the exterior...
Troubleshooting Your washing machine could fail to work. Before calling for Assistance (see page 12), make sure the problem can’t easily be solved by consulting the following list: Problem: The washing machine won’t start. The wash cycle won’t start. The washing machine fails to load water.
Service Before calling for Assistance: • Use the troubleshooting guide to see if you can solve the problem yourself (see Troubleshooting). • If not, turn off the appliance and call the Service Centre closest to you. What to tell the Service Centre: •...