Factory Settings; Switching On The Appliance; Selecting The Temperature; Set The Language - Siemens FI18NP Series Operating Instructions Manual

Factory settings

Upon leaving the factory, the appliance
has been supplied with the following
settings:
– Fascia language:
– Temperature unit:
– The freezer compartment
temperature:
Note
The factory settings (language, tempe-
rature unit) can be changed in the setup
mode.
Switching on
the appliance
Press the on/off button
The appliance starts to cool down when
switched on for the first time. When the
door is opened, the interior light comes
on.
Note
The preset temperatures (factory
settings) are reached after approx.
–
2 8 hours. Do not put any food in the
appliance beforehand.
To change the set temperatures –>
see "Setting the temperature", page 8.
Selecting the
temperature
The temperature can be set from
– –
16 ° C to 24 ° C. We recommend
–
18 ° C.
a setting of
The temperature setting can be
changed using the + (warmer) or –
(cooler) setting buttons.
The temperature can be set at 1 ° C
intervals.
8
To set the temperature:
Active the setup mode using the

or

The
displayed.
Set the desired temperature using
the + (warmer) or
English
buttons.
°C
–
18 °C

Set the language

When the appliance is operated,
all messages are displayed in fascia
in English.
Alternatively, the display languages can
be selected corresponding to the table
on page page 10.
In order to change the display language:
Press setup button
Press the selection button
 
.
until
Press the + or – setting button, until
the desired language is displayed.
Press the setup button
in order to store the settings.
The set temperature is displayed
again in the fascia.

Door alarm

If an appliance door is left open, an
alarm signal is emitted after one minute
and a corresponding alarm message
appears in the fascia.
Close the door.
Pressing the alarm button
switches the signal off. If the door is not
closed properly again, the alarm signal
will be emitted after one minute once
more.
buttons.
symbol is
–
(cooler) setting
.

,
is displayed.
,

"super" freezing

The "super" freeze function is ideal
when storing larger amounts of food.
It should be pre-activated 4–6 hours
before storing. 24 hours are necessary
when using the maximum freezer
capacity fully.
This function is activated by pressing
the "super" freezing button
The symbol appears in the
fascia under "super" freezing
temperature.
The super function ends:
– by pressing the "super" freezing
button again;
– by activating the eco function;
– by activating the holiday mode;
– by activating the sabbatical mode.
After 2 days the appliance auto-
matically switches back to the
temperature which was set before
"super" freezing.
.1.