Panasonic Viera TC-L42E5H Operating Instructions Manual page 31

Menu Item
HDMI1 / 2 / 3 / 4 Input
Reset to Defaults
Connection Test,
Network Connection,
Wireless Network
Settings,
IP/DNS Settings
Network Link Settings
Software Update
New Software Message
Network Status
Off Timer
Auto Standby
Eco Navigation
Child Lock
Adjustments / Configurations (alternatives)
Selects to fit the input signal [Digital] / [Analogue] (p. 73)
[Digital]: When sound is carried via the HDMI cable connection
[Analogue]: When sound is not carried via the HDMI-DVI adaptor cable connection
● For HDMI input
Press the OK button to reset the current Sound Mode, [Balance] and [Surround] to the
default settings
Sets the network setting to use in your network environment (p. 54 - 56)
Sets to control the TV with the devices connected to the network (p. 53)
Checks for available software updates from the Panasonic website
Selects whether to give a notification message when new software is found via network
[Off] / [On]
Displays the network status (MAC Address, current network settings, etc.)
Sets the duration of time until the TV automatically goes into Standby mode
[Off] / [15] / [30] / [45] / [60] / [75] / [90] (minutes) (p. 20)
Sets the duration of time that the TV will remain on when no operation is performed
[Off] / [2] / [4] (hours)
● Automatic input switching with the connected equipment affects this function and time-
count will be reset.
●
The notification message will appear 3 minutes before going into Standby mode.
Automatically sets the TV to the most suitable energy-saving mode
● If you press the OK button, the following items are set as below:
[Eco Mode], [VIERA Link], [Power off Link], [Standby Power Save],
[Power Save] [On]
[Intelligent Auto Standby] [On (No reminder)]
[Auto Standby] [2 hours]
Applies access control for channels or inputs to prevent unwanted access (p. 38)
31 31