Auto Tuning - Panasonic Viera TC-L42E5H Operating Instructions Manual

Auto Tuning

Search and store TV channels automatically.
● These steps are not necessary if the setup has been completed by your local dealer.
● Please complete connections (p. 11 - 13) and settings (if necessary) of the connected equipment before starting Auto Tuning.
For details of settings for the connected equipment, read the manual of the equipment.
14
Turn the TV On with the POWER button
1
(TV) (Remote)
or
Select your language
2
OSD Language
Select your country
3
Country
Colombia Panama
Select the mode to tune
4
TV Signal Selection
DVB-T
Analogue-Antenna
Analogue-Cable
Start Auto Tuning
Select [Start Auto Tuning]
5
TV Signal Selection
DVB-T
Analogue-Antenna
Analogue-Cable
Start Auto Tuning
Auto Tuning starts
●
Auto Tuning will start to search for TV channels and store them.
The stored channels and sorted channel order vary depending on the area, broadcasting
system and conditions of signal reception.
Auto Tuning - Digital TV and Analogue
CH 2
Digital TV Scan
Antenna Scan CH 2
This will take about 6 minutes.
CH Channel Name Type
19 service 7 Digital TV
19
service 8 Digital TV
19 service 5 Digital TV
69 Digital TV
DIGITAL !!07.2
69 Analogue TV
DIGITAL !!07.2
69 service name max20 Analogue TV
Digital TV: 11 Antenna: 0
Searching
select
set
select
Other
access
select
tune / skip tuning
: tune (search for the available channels)
: skip tuning
select
access
69
69
Quality
10
10
10
10
10
10