Gibson Electric guitar Owner's Manual page 36

34
Function
Custom Altered
Tuning
MCK Position
Pull MCK out and
turn to Peg LED
#
Peg LED shines red
Display LEDs
#
Action Remarks
To create your own
"Custom Altered
Tuning," disengage
each Powerhead of the
string required and tune
it manually to the pitch
you want. Then press
the display once, and
the Peg LED will shine
green and the string
LEDs will shine red.
Now strum all strings
one by one (do not
strum too hard!) and
when their frequencies
have been measured
and stored their corre-
sponding LEDs will
shine green.
When all strings of your Custom Altered
Tuning have been registered, the string LEDs
will flash blue 3 times. You may now store
your Custom Altered Tuning to one of the
factory preset positions. Select E, A, D, G, B,
or e, and press the display once. The display
LEDs will flash blue 3 times to indicate your
new Custom Reference Tuning has been
stored at that position, and can be recalled
in the same manner as any other preset.
(Remember that when you store your Custom
Altered Tuning, you will override the preset
position you have chosen.)