Epson BrightLink 450Wi Installation Handbook page 8

Epson BrightLink 450Wi / 455Wi
If you are not connected to another image source, the Slideshow
program appears automatically.
Files for images that have been scanned or modi ed will display
an icon, rather than a thumbnail image.
If necessary, press the arrow buttons on the remote control to
highlight the device you want to present from, then press the
button.
Enter
3. If you need to select a subfolder on your device, press the arrow
buttons to highlight the folder and press
4. To display an individual image, press the arrow buttons to
highlight it and press
press the left or right arrow button.
5. To display a slideshow of all the images in the current folder, use
the arrow buttons to highlight
Slideshow screen and press
one time through. At the end, you see the folder display again.
Select the following as necessary to control your display or slideshow:
To move back up a folder level, highlight
of the Slideshow screen and press
To select a di erent device, highlight
right corner of the screen, press
Enter
. To display additional image les,
Enter
on the bottom of the
Slideshow
. The images display sequentially
Enter
Back to Top
.
Enter
Select drive
, and select the device.
Enter
.
at the top
in the upper
INSTALLATION HANDBOOK
Remote Control Information
note
To rotate a displayed image,
press the up or down button on
the remote control until it is
displayed correctly.
note
To display a slideshow from
a folder that is not open,
highlight the folder and press
the button on the
Esc
remote control. Then select
from the menu
Slideshow
that appears and press
.
Enter
To begin a slideshow from a
particular image, use the
arrow buttons to highlight
that image, press ,
Enter
then press again.
Enter
8