Using The Accesories; Installation And Removal Of The Lcd Hood; Mounting And Removing The Body Cap - Olympus PT-EP03 Instruction Manual

Using the accesories

Installation and removal of the LCD hood

Installation
Fit the LCD hood as shown in the figure into the rails above and below the LCD monitor window one after
the other.
Removal
Remove the LCD hood from the rails above and below the LCD monitor window one after the other by
widening the LCD hood.
Rails
Installation Removal

Mounting and removing the body cap

Install to fit the concave and convex parts of the body cap and lens ring. Be sure to remove the body cap
before shooting.
Lens ring
En
EN 8