Connection Instruction; Hardware Connection - Computer - TP-Link TL-PA211 User Manual

Note:
1. If the pair button is pressed till all the LEDs turn off (about 10 seconds), the Powerline Adapter will
leave the network which it is associated with and its network name assumes a random value. The
Power LED turns off when it disconnects from the Powerline network.
2. For detailed information about the Pair button, please refer to
Use the Pair Button.

2.4 Connection Instruction

To ensure the optimum performance of the Powerline Adapter and significantly improve the transmission
capacity of the network, we recommend that you comply with the following connection rule:
Plug the Powerline Adapter directly into a wall socket but not the multiple sockets.
2.5 Hardware Connection – Computer
For those computers you wish to be networked by Powerline Adapter, each of the computers must be
properly connected with a Powerline Adapter through an Ethernet (RJ45) cable.
Following are the steps to properly connect the Powerline Adapter to your computer:
1． Connect one end of the provided Ethernet (RJ45) cable to the Powerline Adapter's Ethernet port.
2． Connect the other end of the Ethernet (RJ45) cable to you computer's LAN port.
3． Plug the Powerline Adapter into a wall socket next to the computer.
4． Turn on your computer.
5． Check and confirm that the Power LED
ON.
The hardware connection mechanism is shown below:
TL-PA211
Chapter 5 Advanced Feature: How to
and Ethernet LED
6
AV200 Powerline Adapter
on the Powerline Adapter are