Activating DNR (Digital Noise Reduction)
If the incoming signal is weak and the picture is blurry, the
picture may be improved when using this function�
1
From the Noise Reduction menu, press s or r to
select DNR �
2
Press v or w to select Auto , Off , Low , Middle or
High �
Adjusting the Static Gamma
The static gamma feature allows you to adjust the levels of
black in the picture�
1
From the Advanced Picture Settings menu, press
s or r to select Static Gamma �
2
Press v or w adjust the level�
Adjusting Resolution+
The Resolution+ feature allows you to adjust the clarity
levels for your desired picture settings�
1
From the Advanced Picture Settings menu, press
s or r until Resolution+ is selected, and then
press
�
2
In the Resolution+ field, select On �
Resolution+
Resolution+
Level
3
Press s to select Level , and then press v or w to
adjust the level�
Notes:
• This feature may not work properly depending on
the content.
• Adjustable range varies according to the Picture
Mode you set.
• Noise may appear on the image depending on the
device connected to the TV (e.g. a device with a
specific enhancer function).
Using Expert Mode
This feature allows you to turn the colours red, green and
blue on/off individually in order to adjust each colour more
accurately�
Note:
This feature is not available when Picture Mode is
set to AutoView.
1
From the Advanced Picture Settings menu, press
s or r until Expert Mode is selected, and then
press
�
Using the TV's features (General)
On
3
2
Press s or r to select either Red , Green or Blue ,
and then press v or w to select On �
Select Off for the other two colours�
Expert Mode
Red
Green
Blue
Colour
Tint
3
Press s or r to select Colour or Tint , and then
press v or w to adjust�
Resetting the advanced picture settings
This feature allows you to reset the current Advanced
Picture Settings to the default values�
1
From the Advanced Picture Settings menu, press
s or r until Reset is selected �
2
Press
�
Viewing the Control Visualization
This feature displays the brightness histogram and control
curve of each scene�
1
From the PICTURE menu, press s or r until
Control Visualization is selected, and then press
� The histogram window will appear�
Control Visualization
Number
Of
Pixels
Output
2
Press
to return to the previous menu�
RETURN
Using Auto Format
When the TV receives a true HDMI signal picture and
Auto Format is On, the picture will automatically be
displayed in HDMI signal format, irrespective of the TV's
previous setting� When in Digital TV mode, the display
format will follow the broadcasted format�
1
From the PREFERENCES menu, press
select Display Settings �
On
On
Off
0
0
Distribution
Brightness
Control Curve
Input
or
to
25