System Standby; System Audio Control; Enable Hdmi-Link; Auto Power On - Toshiba 32W2300A Owner's Manual

System Standby

This feature automatically switches the connected
equipment into standby when the television goes into
standby and conversely for the television to switch into
standby when connected equipment goes into standby. It
is selected in the HDMI CEC Control menu.
Note: This feature is dependent on the connected
equipment and television setting.

System Audio Control

Using the Speaker Preference feature allows the
television's remote control to adjust the volume or mute
the sound of the speakers connected to the television via
an AV amplifier.
Ensure that the connected AV amplifier and HDMI CEC
equipment are selected in the input source selection and
that the Speaker Preference is set to Amplifier in the
HDMI CEC Control menu.
Note: When the AV Amplifier is switched on, its input
source changed or the volume adjusted, the sound will
be output from the AV Amplifier's speakers even if TV
speakers has been selected. Turn the television off then
on again to output the sound from the TV's speakers.
The full function may not work and is dependent on the
amplifier being used.

Enable HDMI-LINK

When the Enable HDMI-LINK is set to On, it allows the
other functions to be enabled.
1. Press MENU 3UHVV
PREFERENCES and press
submenu.
PICTURE SOUND
2. 3UHVV RU WR VHOHFW HDMI CEC Control, and
press to enter the submenu.
PREFERENCES
HDMI CEC Control
Teletext
Panel Lock
Auto Format
4:3 Stretch
Blue Screen
Side Panel
DivX Registration
DivX Deregistration
Enter
OK
30
Using the TV's features (General)
RU WR VHOHFW
to enter the
SETUP APPLICATIONS
PREFERENCES
OK
Auto
Off
On
Off
On
1
OK
Back
RETURN
3. 3UHVV RU WR VHOHFW Enable HDMI-LINK, and
SUHVV RU WR VHOHFW On or Off.
HDMI CEC Control
Enable HDMI−LINK

Auto Power On

Auto Standby

Amplifier Control

Speaker Preference

Edit
Auto Power On
The Auto Power On setting allows the television to be
automatically switched On if user pressed Play key on
the HDMI CEC device.
1. In the HDMI CEC Control PHQX SUHVV
select Auto Power On.
2. 3UHVV RU WR VHOHFW On or Off.
Auto Standby
When the Auto Standby is enabled, switching off the
television will automatically switch off all connected HDMI
CEC equipment.
1. In the HDMI CEC Control PHQX SUHVV
select Auto Standby.
2. 3UHVV RU WR VHOHFW On or Off.
$PSOL¿HU &RQWURO
When Amplifier Control is set to On, it allows the
Speaker Preference feature to become available.
1. In the HDMI CEC Control PHQX SUHVV
select Amplifier Control.
2. 3UHVV RU WR VHOHFW On or Off.
Speaker Preference
This feature allows the audio output preference to be
set to the TV speakers or Amplifier speakers. The
Amplifier option lets the television's remote control
adjust or mute the volume of the audio.
1. In the HDMI CEC Control PHQX SUHVV
select Speaker Preference when Amplifier Control
is On.
2. 3UHVV RU WR VHOHFW TV Speakers or Amplifier.
Note: This function is only available when the TV is
connected to audio receivers that support CEC function.
On
On
On
On
TV Speakers
Back
RETURN
RU WR
RU WR
RU WR
RU WR