Turning On The Tv; Switching On; Quick Setup - Toshiba 32W2300A Owner's Manual

Turning on the TV

Switching On

If the RED Standby LED is unlit, check that the plug is
connected to the power supply. If the picture does not
appear press on the remote control, it may take a few
moments.
To put the television into Standby press
control. To view the television press
may take a few seconds to appear.
For energy saving:
We recommend that you use the television with factory
settings. These settings are designed for energy saving.
Unplugging the mains plug will reduce energy use to
zero. This is recommended when the television is not
being used for long periods, e.g. when on holiday.
Reducing the brightness of the screen will reduce energy
use. Energy efficiency reduces energy consumption and
can save money by reducing electricity bills.
Note: If you skip this step, the channel scan can still be
performed later in the Setup Menu.

Quick Setup

Before switching on the TV, put your decoder and media
recorder to Standby if they are connected and ensure the
antenna is connected. To setup the TV, use the buttons
on the remote control. (
remote control)
1. For first time use, plug in the television and press
the button.
The Quick Setup screen will appear at the first use.
Note: This function is accessed in the SETUP ¼ Quick
Setup menu.
2. 3UHVV RU WR VHOHFW Language and then press
RU WR VHOHFW \RXU ODQJXDJH
Quick Setup
Language
Digital Subtitle Language
Digital Subtitle Language 2nd
Audio Language
Audio Language 2nd
Select OK Tuner Mode
3. 3UHVV RU WR VHOHFW Digital Subtitle Language,
Digital Subtitle Language 2nd, Audio Language
and Audio Language 2nd WKHQ SUHVV
select your preferred language.
16
Getting started
on the remote
again. The picture
page 14 Learning about the
English
English
French
English
French
RETURN Back
RU WR
4. 3UHVV RU WR VHOHFW \RXU WLPH ]RQH
Time Zone
This function allows you to manually
set the time zone.
New South Wales
Select Tune Mode
OK
Press to select Location.
5. 3UHVV RU WR VHOHFW Home or Store. For normal
home use, select Home.
Location
To use the TV for the display in a store showroom,
please select [Store].
[Home] mode is recommended for normal use.
Select Auto tuning
OK
When Store is selected, the confirmation window
appears.
Location
You have selected [Store].
This mode consumes more energy.
Are you sure you want to set to this mode?
Select OK Auto tuning
3UHVV RU WR VHOHFW YES or NO.
6. Press to enter the Auto tuning menu.
Note: Please make sure the aerial is connected to the
TV before tuning.
Auto tuning
Tuning Mode
Start Scan
Edit
3UHVV RU WR VHOHFW 7XQLQJ 0RGH DQG WKHQ SUHVV
RU WR VHOHFW ATV, DTV or ATV and DTV.
3UHVV RU WR VHOHFW Start Scan and press
Auto tuning (DTV)
Progress
6 %
Channel: 33
EXIT
The search will begin for all available stations. The slide
bar will move along the line as the search progresses.
You must allow the television to complete the search.
When the search is complete the television will
automatically select channel 1. This may not be a clear
picture or the signal may be weak, so the station order
can be changed using ATV/DTV Manual Tuning in the
SETUP menu.
Back
RETURN
Home
Back
RETURN
NO
RETURN Back
DTV
OK
Back
RETURN
.
Found
0
Stop