Section; Section 3 - Verizon 7500 Setup Manual

Verizon High Speed Internet for Business
Note: Make sure DHCP is NOT enabled/checked.
Check the box next to Public LAN Enable.
Enter the 1st IP Address (of the block of IP's) in the
Public LAN IP Address box.
This is the address the router will use to "bridge" the router
to the computers on the network.
Enter the Subnet mask 255.255.255.248 into the Public LAN
Subnet Mask box.
Make sure there is a check mark in the Public LAN Enable box.
Click Save to save the settings. The other IP's will be entered
directly into the computers on the network.
Proceed to Section 3 for computer configuration instructions
for multiple static IP addresses.
For each additional PC follow the instructions in Section 3,
"Configuring your Static IP address into Windows XP, Windows Vista
and MAC OS X. "
23