ESC/Motor Wiring Diagram
10 • SLASH 4X4 ULTIMATE
TRAXXAS TQ 2.4GHz RADIO & VELINEON POWER SYSTEM
Your model is equipped with the newest Traxxas 2.4 GHz
transmitter with Traxxas Link.
™
The transmitter has two channels
for controlling your throttle and steering. The receiver inside the
model has 5 output channels. Your model is equipped with one
servo and an electronic speed control.
TQ 2.4GHz TRANSMITTER
Antenna
Multi-Function Knob
Throttle Neutral
Adjust
Steering
Trim
Throttle
Trigger
Power
Switch
Battery
Compartment
MODEL WIRING DIAGRAM
Traxxas High-Current
Connector (Male)
to Battery
Antenna
Receiver
Steering Wheel
* Not Used
Channel 1
Steering Servo
VXL-3s ELECTRONIC SPEED CONTROL
Traxxas High-Current
Connector (Male)
to Battery
Cooling Fan
Connector
(for optional use)
LED
Auxiliary Port
Set Button
(for optional use)
Menu Button
Red/Green Status LED
see page 31 for more info
Velineon
Brushless Motor
(see side bar for proper
Channel 2
motor wiring)
Electronic
Speed Control
Motor Cap
to Motor
Heat Sink
EZ-Set Button
(On/Off Button)
Receiver cable
(RX wire)