Table of Contents
Advertisement
Operating Instructions
! Unlatch the lamp mounting
closing bracket abd take out the
lamp bulb
! To replace the lamp bulb in the
trafficator, remove the trafficator
glass from the trafficator casing.
Changing fuses
! Open the rear engine covering
! Swing-out and open the fusebox
! Replacing blown fuses
Notes:
— Replacement fuses (see
illustration)
— Description (see inside of lid)
— Use only fuses with the same
current rating
Lubricating the bearings
and cylinders
Tip cylinder
KMR 1700 D
Stroke cylinder and thrust rod
Lubricating nipples are provided on
the bearings
Use a grease gun to lubricate them
The cylinder running surfaces must
be coated with a grease film
Battery safety instructions
Notes:
Observe the operating instructions
Work on batteries is permitted only
after instruction by trained personnel
Danger!
! Wear safety goggles and
protective clothing
! Observe regulations for the
prevention of accidents as well
as DIN VDE 0510, VDE 0105 T.1
Danger!
Risk of fire and explosion!
— Smoking prohibited
— No naked flames, glowing
embers or sparks in the vicinity of
batteries
— Do not place any objects or tools
on the battery because voltage is
always present between the
battery poles
— Areas in which batteries are
charged must be well ventilated,
as highly explosive gas forms
during charging
Danger of acid burns!
! Rinse out or rinse off splashes of
acid in the eye or on the skin with
copious quantities of clean water
! Then consult a doctor
immediately
! Wash contaminated clothing with
water
— Old batteries with this symbol are
reusable commodities and must
therefore be returned for
recycling
— Old batteries which are not
returned for recycling must be
disposed of as special waste,
thereby observing all statutory
regulations
English
Removing and installing
battery
! Unscrew negative pole lead
! Unscrew positive pole lead
! Unscrew the battery holder
46
Hide quick links:
Advertisement
Table of Contents
