Repair procedure
1. Sealing
Switch off the ignition.
Turn the selector A to the
"sealant" position.
Check that the switch B is
in position "O" .
Avoid removing any foreign bod-
11
ies which have penetrated into
the tyre.
194
P R A C T I C A L I N F O R M A T I O N
Uncoil the white pipe G fully.
Unscrew the cap from the white
pipe.
Connect the white pipe to the valve
of the tyre to be repaired.
Take care, this product is harm-
ful (e.g. ethylene-glycol, coloph-
ony...) if swallowed and causes
irritation to the eyes.
Keep this product out of the
reach of children.
Connect the compressor's electric
plug to the vehicle's 12 V socket.
Start the vehicle and leave the en-
gine running.
Do not start the compressor be-
fore connecting the white pipe to
the tyre valve: the sealant prod-
uct would be expelled through
the pipe.