Table of Contents
Advertisement
About Advanced Features & Operation
COMFORT ALERT DIAGNOSTICS - Your thermostat installation
may include an external Comfort Alert diagnostics module that
monitors your heat pump or air conditioning compressor. If
the Comfort Alert detects an abnormal condition, the Service
Equip icon will flash on the thermostat display.
DUAL SETPOINT BEHAVIOR - The adjustable setpoint range is:
45 - 99 degrees in Fahrenheit and 7 - 36 degrees in Centi-
grade. When in the Heat or Cool modes, this adjustable
range is unhampered. When adjusting any Auto mode, inclu-
ding programming 4 time periods, the thermostat will not
allow the h
eat setpoint to get closer to the cool setpoint than
the value programmed as the minimum difference
page 15. When entering the Auto mode, the heat and cool
setpoints will remain spread apart by the amount that they
were adjusted, prior to entering Auto. For example: If the
cool setpoint was set to 80 while in the cool mode and the
heat setpoint was adjusted to 70 while in the Heat mode,
upon entering the Auto mode the heat and cool setpoints
would be 80 and 70. Both setpoints would then move up
and down together, (in this example spread by 10 degrees),
by pressing the up or down buttons. To move the Heat and
cool setpoints closer together, enter the Cool or Heat mode
by pressing the MODE button, then adjust the setpoint(s)
closer together. The heat setpoint is limited to how close it
can come to cool by step #11 (page 15).
Page 22
in
step #11
Hide quick links:
Advertisement
Table of Contents
