Related Manuals for Kenmore 105.20001410
Summary of Contents for Kenmore 105.20001410
- Page 1 Use & Care Guide Kenmore ™ Smart Thermostat Model: 105.20001410 P/N XXXXXXXXX Sears Brands Management Corporation, Hoffman Estates, IL 60179 www.kenmore.com www.sears.com www.kmart.com...
- Page 2 P 11 ASSURELINK INFORMATION Refer to the Quick Start / Installation Guide that came with your Kenmore Smart Thermostat for detailed installation instructions. Also refer to it for information on creating an Assurelink Connected account, setting up your gateway, and setting up your thermostat for connected operation from your phone or web browser.
- Page 3 IMPORTANT SAFETY INSTRUCTIONS When using your equipment, basic safety precautions should always be followed to reduce risk of fire, electric shock, and injury to persons, including the following: Read all of the instructions listed here and/or in the user manual before you operate the device. Give particular attention to all safety precautions.
- Page 4 Select Auto Cool Auto System Reset Button (located at the bottom part of the Kenmore Smart Thermostat) KEY/TOUCH ACTION FUNCTION Up Key Increase set temperature for TEMP HOLD or PERM HOLD. Also used with Down key to activate "Key Lock"...
- Page 5 FEATURES / OPERATION Home Screen Fault Icon Auxiliary Icon Filter Icon Time Month; Date; Year Energy Saving Icon Key Lock Icon Room Temperature Heat & Cool Output Icon Fan Icon Assurelink Connected Icon Set Point Temperature Battery Icon Current Operating Status Program Number System Mode Fan Mode...
- Page 6 FEATURES / OPERATION Quick Change of Set Temperature for Temporary Hold and Permanent Hold To increase the temperature, press Up when the thermostat is on the Home screen. To decrease the set temperature, press Down. Press once for each degree of temperature change. The latest set temperature will be stored and held until the next scheduled temperature change.
- Page 7 FEATURES / OPERATION Clock Enter Clock Setup by pressing Menu/ Select. Set the Time Zone with the Up & Down keys. Press Menu/Select to confirm. Then select 12 Hr or 24 Hr Clock View with the Up & Down keys. Press Menu/Select to confirm.
- Page 8 Set Temperature Offset The Kenmore Smart Thermostat has been factory calibrated so you usually do not need to set any temperature offset. However, in some rare situations you find that the temperature is not accurate enough, you can use this function to offset the displayed temperature from -7°F to +7°F (-4°C to +4°C).
- Page 9 Example: The Dead Band is set to 5° F and the thermostat is set to Cool mode at 70°F. If the room temperature drops down to 65°F, the system will switch from Cool to Heat mode. The Kenmore Smart Thermostat can set the dead band from 2°F – 5°F (2.5°C – 6°C).
- Page 10 SPECIFICATIONS Temperature unit °F / °C Operating temperature 32-113 °F / 0-45 °C Indoor temperature measurement range 40-99 °F / 5-37 °C 908.50-919.74MHz RF frequency RF range Up to 1300 ft (400 m) line of sight Battery Power 2 x AA Alkaline battery A/C power (optional) 18-30 V AC between R and C terminals Size...
- Page 11 TROUBLESHOOTING TROUBLE PROBABLE CAUSE SOLUTION • No Display when Batteries are depleted Replace the batteries √ touching the keys For 24 VAC connected Check the connections and correct them √ thermostat, the RH/RC or C Turn the HVAC system back on. √...
- Page 12 FREQUENTLY ASKED QUESTIONS QUESTION ANSWER How can the thermostat help to Use the Schedule Program to set the temperature that consumes • √ save energy? less energy. For example, lower the temperature in winter during a period in the days that your family is usually not at home.
- Page 13 Appendix WIRING DIAGRAM Wiring Diagram for Conventional Heat Cool Single Transformer System Wiring Diagram for Conventional Heat Cool Two Transformer System P 12...
- Page 14 Appendix Wiring Diagram for Floor Heating System Wiring Diagram for Heat Pump Single Transformer System P 13...
- Page 15 Appendix Wiring Diagram for Heat Pump with two Transformer System P 14...
- Page 16 Appendix Terminal Definition Terminal Terminal Heat Pump Conventional System System Non-HP 24VAC Power supply for Cooling side 24VAC Power supply for Heating side 24 VAC common for control circuit and thermostat power input System Monitor No use 1 st stage 1 st stage cooling compressor 2 nd stage...