Tools Needed For Assembly; Carton Contents; Unpacking Your Bench Grinder - Porter-Cable 6 IN. (150 MM) VARIABLE SPEEDGRINDER WITH WORKLIGHT Instruction Manual

TOOLS NEEDED FOR ASSEMBLY

Not supplied
Phillips screwdriver

CARTON CONTENTS

UNPACKING AND CHECKING CONTENTS
Carefully unpack the grinder and all its parts, and
compare against the list below and the illustration to the
right. With the help of an assistant place the grinder on
a secure surface and examine it carefully.
WARNING
!
● To avoid injury from unexpected starting or electrical
shock, do not plug the power cord into a source of
power during unpacking and assembly. This cord
must remain unplugged whenever you are adjusting/
assembling the grinder.
● The grinder is heavy and should be lifted with care.
If needed, get the assistance of someone to lift and
move the grinder.
● If any part is missing or damaged, do not attempt
to assemble the grinder, or plug in the power cord
until the missing or damaged part is correctly
replaced.
TABLE OF LOOSE PARTS
ITEM DESCRIPTION
A. Bench grinder
B. Tool rest mounting bracket
C. Tool rest
D. Tool rest & eye shield hardware
bag
Locking knob / flat washer
Locking nut knob / flat washer /
carriage bolt
E. Spark guards
F. Spark guard hardware bag
Phillips screw
Lock washer
Flat washer
G. Right / left eye shields
H. Coolant tray
I. Wheel dressing tool
Adjustable wrench
QUANTITY
1
2
2
2 each
2 each
2
4
4
4
1 each
1
1

UNPACKING YOUR BENCH GRINDER

A
E
G
I
8
B
C
D
F
H