Discs - Panasonic RX-D55 Operating Instructions Manual

Portable stereo cd system
Table of Contents

Advertisement

Discs

Basic play
Basic play
1
Press [x, CD OPEN/CLOSE] to open the disc tray and then load the
disc with the label facing up.
2
Press [x, CD OPEN/CLOSE] again to close.
3
Press [4/9, CD] to start play.
Stop playback
Press [8] (stop) during play.
Pause play
Press [4/9, CD] during play.
Press again to resume play.
Skip tracks
Press [2/3] or [5/6] (main unit: [–/2] or
[6/+]).
During RANDOM or 1-ALBUM RANDOM play, you cannot
skip to tracks that have been played.
Search
through
Press and hold [2/3] or [5/6] (main unit: [–/2]
tracks
or [6/+]) during play or pause.
• During program play (Z see right), or random play
(Z see below, "Play Mode function"), you can search
only within the track.
Skip album
Press [R/T, ALBUM] in the play mode.
Press [R/T, ALBUM] once and then the numeric buttons in
the stop mode.
Play Mode function
Press [PLAY MODE] to select the desired mode.
1-TRACK
Play one selected track on the disc.
Press the numeric buttons to select the track.
RX-D55
RX-D50
1TR
1-
1-ALBUM
RX-D55
RX-D50
Play one selected album on the disc.
1ALBUM
ALBUM
Press [R/T, ALBUM] to select the album.
RANDOM
Play a disc randomly.
RX-D55
RX-D50
RND
RND
1-ALBUM RANDOM
RX-D55
RX-D50
Play all tracks in one selected album randomly.
1ALBUM RND
ALBUM RND
Press [R/T, ALBUM] to select the album.
Checking the track information
You can view the information of the current track from the display panel.
Press [DISPLAY] repeatedly during play or pause.
Elapsed
Remaining
play time
play time
RX-D55
Press [MP3 INFO] repeatedly during play or pause.
ID3 (Album)
ID3 (Track)
Note
• This unit supports ver. 1.0 and 1.1 ID3 tags.
• ID3 is a tag embedded in MP3 track to provide information about the track.
• Titles containing text data that the unit does not support may be differently
displayed.
RX-D50
Display for MP3 shows only "Elapsed play time".
NOTE about using a DualDisc
The digital audio content side of a DualDisc does not meet the technical
specifi cations of the Compact Disc Digital Audio (CD-DA) format so playback
may not be possible.
NOTE on MP3
• Files are treated as tracks and folders are treated as albums.
• This unit can access up to 999 tracks, 255 albums and 20 sessions.
• Disc must conform to ISO9660 level 1 or 2 (except for extended formats).
• To play in a certain order, prefi x the folder and fi le names with 3-digits
numbers in the order you want to play them.
Limitations on MP3 play
• If you have recorded MP3 on the same disc as CD-DA, only the format
recorded in the fi rst session can be played.
• Some MP3s may not be played due to the condition of the disc or recording.
• Recordings will not necessarily be played in the order you recorded them.
RX-D55
Elapsed play time
Track name
Album name
ID3 (Artist)
Elapsed play time
Advanced play
Advanced play
Repeat play
You can repeat program play or other selected play mode.
To activate
Press [REPEAT].
RX-D55
"ON REPEAT" and "
" are displayed.
To cancel
Press [REPEAT] again.
RX-D55
"OFF REPEAT" is displayed and "
Program play
This function allows you to program up to 24 tracks.
1
Press [4/9, CD] and then [8] (stop).
2
Press [PROGRAM].
"PGM" is displayed.
3
Press the numeric buttons to select your desired track.
Repeat this step to program other tracks.
4
Press [4/9, CD] to start play.
1
Press [4/9, CD] and then [8] (stop).
2
Press [PROGRAM].
"PGM" is displayed.
3
Press [R/T, ALBUM] to select your desired album.
4
Press [5/6] once and then the numeric buttons to select your
desired track.
5
Press [OK].
Repeat steps 3 to 5 to program other tracks.
6
Press [4/9, CD] to start play.
For two-digit track, press [ 10] once then the two digits.
For three-digit track (MP3 only), press [ 10] twice then the three digits.
Cancel program
Press [PROGRAM] in the stop mode.
mode
Replay the program
Press [PROGRAM] then [4/9, CD] in the stop mode.
Check program
Press [2/3] or [5/6] (main unit: [–/2] or
contents
[6/+]) when "PGM" is displayed in the stop mode.
To check while programming, press [PROGRAM]
twice after "PGM" appears, then press [2/3] or
[5/6].
Add to the program
Repeat step 3 in the stop mode.
Repeat steps 3 to 5 in the stop mode.
Clear the last track
Press [DEL] in the stop mode.
Clear all
Press [CLEAR] in the stop mode.
programmed tracks
"CLR ALL"
Note
• When you try to program more than 24 tracks, "PGM FULL"
("FULL"
RX-D50
) appears.
• The program memory is cleared when you open the disc tray.
NOTE on CDs
Choose discs with this mark:
• This unit can access up to 99 tracks.
• This unit can play MP3 fi les and CD-DA format audio CD-R/RW that have
been fi nalised.
• It may not be able to play some CD-R/RW due to the condition of the
recording.
• Do not use irregularly shaped disc.
• Do not use disc with labels and stickers that are coming off or with adhesive
exuding from under labels and stickers.
• Do not attach extra labels or stickers on the disc.
• Do not write anything on the disc.
RX-D50
"
" is displayed.
RX-D50
" is cleared.
"
" is cleared.
RX-D55
("CLEAR"
RX-D50
) is displayed.
RX-D55
5
5

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rx-d50

Table of Contents