Table of Contents
Advertisement
MAINTENANCE
SCHEDULE
Check Brake Operation
Check Tire Pressure
T
Check Operator Presence & ROS Systems
R
Check for Loose Fasteners
A
C
Check/Replace Mower Blades
T
Lubrication Chart
0
Check Battery Level
R
Clean Battery and Terminals
Clean Debris Off Steerin Plate
Che
ck Transaxle Coolin
Check Mower Levelness
Che
ck V-Belts
Check En ine Oil Level
Chan e En ine Oil (models with oil filter)
Chan e En ine Oil (
models
E
Clean Air Filter
N
Clean Air Screen
G
Inspect Muffler/Spark Arrester
I
N
Replace Oil Filter (If equipped)
E
Clean En ine Coolin Fins
Replace Spark Plu
Replace Air Filter Paper Cartrid e
Replace Fuel Filter
1 - Chan e more often when operatin under a heavy load or in hi h ambient temperatures
2 - Service more often when operatin in dirty or dusty conditions.
GENERAL RECOMMENDATIONS
The warranty on this tractor does not cover
items that have been subjected to operator
abuse or negligence. To receive full value
from the warranty, operator must main tain
tractor as instructed in this manual.
Some adjustments will need to be made
periodically to properly maintain your tractor.
At least once a season, check to see if
you should make any of the adjustments
described in the Service and Adjustments
section of this manual.
• At least once a year you should replace
the spark plug, clean or replace air filter,
and check blades and belts for wear. A
new spark plug and clean air filter assure
proper air-fuel mixture and help your en-
gine run better and last longer.
BEFORE EACH USE
1. Check engine oil level.
2. Check brake operation.
3. Check tire pressure.
4. Check operator presence and
ROS systems for proper operation.
5. Check for loose fasteners.
MAINTENANCE
BEFORE
EACH
USE
without oil filter)
EVERY
EVERY
8
25
HOURS
HOURS
3
4
5
1,2
2
2
3 - Replace blades more often when mowin in sandy soil.
4 - Not required if equipped with maintenance-free battery.
LUBRICATION CHART
➀
Spindle
Zerk
➀
Front
Wheel
Bearing
Zerk
➀
Steering
Sector
Gear
Teeth
➀
General Purpose Grease
➁
Refer to Maintenance "ENGINE" Section.
IMPORTANT: Do not oil or grease the pivot
points which have special nylon bearings.
Viscous lu bri cants will attract dust and dirt
that will short en the life of the self-lu bri cat ing
bearings. If you feel they must be lu bri cat ed,
use only a dry, pow dered graphite type
lu bri cant sparingly.
17
EVERY
EVERY
EVERY
50
100
SEASON
HOURS
HOURS
1,2
1
,
2
2
2
5 - See Cleanin in Maintenance Section.
➀
Zerk
➀
Bearing Zerk
02501
BEFORE
STORAGE
Spindle
Front Wheel
➁
Engine
➁
Mandrel
Zerks
Advertisement
Table of Contents
