Accessing Versalink; Logging On To Versalink - Verizon VERSALINK 327W User Manual

VersaLink Wireless Gateway (Model 327W)

7. ACCESSING VERSALINK

7.1 Logging on to VersaLink

This section explains the logon procedures for your VersaLink. This procedure should be used any time you want to
access or make changes to VersaLink's configurations or firewall settings.
IMPORTANT: VersaLink is capable of automatically sensing protocol type (DHCP or PPPoE). This process is
designed to start after you have connected VersaLink. To access VersaLink, your PC must be configured for DHCP.
Refer to your Windows help screen for information on configuring your computer for DHCP. At your PC, click
Start, then Help to access the Windows help screen.
To log on to VersaLink, start your Web browser and type the following IP address in the browser's address bar:
After you type the IP address, press Enter on your keyboard. The following Modem Secure screen will appear.
Type the default user name (which is
provided. Click OK.
NOTE: Hereafter, the VersaLink Wireless Gateway will be referred to as the "Router" or "Modem."
030-300505 Rev. A
http://192.168.1.1
admin
) and the default password (which is
15
User Guide
password
) in the fields
admin
password
April 2007