Registering a camera on this unit
1
Select
This unit shifts to registration standby mode. (After about 2 minutes,
registration standby mode is cancelled.)
2
Select [confg]
camera.
[PREP] blinks on the display of the camera, and preparation for registration
starts.
3
When [OK] is displayed on the LCD screen of this unit, press the
REC/ENTER button of this unit to confirm registration.
When registration is completed, [DONE] appears on the display of the camera
and 2 seconds later recording mode is restored.
4
Repeat steps 1 to 3 to register each camera that you want to
connect.
Notes
For more details, refer to the Instruction Manual of the camera.
Register cameras before connection standby mode of this unit is cancelled.
Once 5 cameras have been connected to this unit, another camera cannot be
registered.
in the MENU screen.
[Wi-Fi]
[multi]
[NEW] in [SETUP] on the
11-GB