Error Correction Mode - Sharp FO-A660 Operation Manual

Sending a Fax by Automatic Dialling
♦
To stop automatic redialling, press
♦
Under certain conditions (for example if a person answers the call on a
telephone), automatic redialling may stop before two redialling attempts are
made.

Error Correction Mode

The fax machine is set to automatically correct any distortions in a
transmission due to noise on the telephone line before printing at the
receiving end. This function is called Error Correction Mode (ECM). ECM is
effective for both transmissions and receptions, and is only effective when the
other fax machine has ECM as well.
When there is considerable noise on the line, you may find that transmission
with ECM turned on takes longer than normal. If you prefer a faster
transmission time, you can try turning ECM off.
1
FUNCTION
Press
2
Press
3
Press
4
Press
1
select NO.
STOP
5
Press
54
once and once.
once and 4 times.
once.
to select YES, or
to return to the date and time display.
STOP
.
to
2
Display:
OPTION SETTING
ECM MODE
1=YES, 2=NO
The display briefly shows
your selection, then:
RECEIVE RATIO