Drainage Connection; Electrical Installation - Asko W6342 Operating Instructions Manual

Installation

Drainage connection

The machine is supplied with a connected
drainage hose that can be fastened to a
laundry sink or similar. The height must be
600 - 900 mm above floor level.
The lower position (600 mm) is always
preferable. Ensure that the drainage hose has
no kinks.
The machine can also be connected to the
drain via a spigot connection. In this case the
hose should also be 600-900 mm above the
floor. The internal diameter of the hole should
be at least 18 mm.
• Cut the nipple
• Remove burrs from the hole.
See the illustration.
Minimum 18 mm
24

Electrical installation

Electrical connections must be via a plug
connected to an earthed wall socket or by
cable for fixed installation, with all-pole
disconnection, by a qualified professional.
Caution!
If this appliance is supplied from a cord
extensions set or electrical portable outlet
device, the cord extension ser or electrical
portable outlet device must be positioned so
that it is not subject to splashing or ingress of
moisture.
Connection on delivery
600-900 mm
The machine is supplied as 1-fas, 230V with
a plug, heat output watt 2000W and has a
ampere 10A. Any earth fault fuses must be
type A.
Note!
Repairs and maintenance must be carried out
by a qualified professional.