Toshiba 42WL58A Owner's Manual page 51

Equipment connections
PC setting
• If the clock phase, which synchronize the PC signal and LCD display, is not optimized, the picture will blur.
This function enables you to adjust clock phase and display a clear picture.
• If the sampling clock does not match with the dot clock frequency of the PC, blurred picture detail will occur, or
screen width will change, or drift patterns in vertical lines may be apparent.
This function enables you to adjust it and optimize the picture.
• The Reset function adjusts the PC Setting to the factory settings.
To adjust a PC setting (continued)
CALL
1 2
4 5
7 8
0
MENU
P
DVD
MENU
OK
P
TV
VTR
DVD
Note:
The optimum points of the clock phase
and sampling clock adjustments may be
incomprehensible according to the input
signals.
(continued)
First press and hold the
appears on the screen, then press the
order to select the PC input mode (see page 29).
To adjust the clock phase of the picture:
3
6
9
EXIT
To adjust the sampling clock:
To reset the PC setting:
button until the video input mode list
Press the MENU button, then
press the or button to
display the SET UP menu.
Press the or button
to select PC Setting.
Press the OK button, then press
the or button to select
Clock phase.
Press the or button to
obtain a clear picture.
From the PC Setting menu,
press the or button
to select Sampling clock.
Press the or button to
optimize the picture.
From the PC Setting menu,
press the or button to
select Reset on the 2nd page.
Press the OK button.
or and OK buttons in
SET UP
English
Language
AV connection
OK
PC Setting OK
MENU Back EXIT Watch TV
PC Setting 1/2
0
Horizontal position
0
Horizontal width
0
Vertical position
Vertical height 0
Clock phase 0
0
Sampling clock
MENU EXIT
Back Watch TV
Clock phase
PC Setting 1/2
Horizontal position 0
Horizontal width 0
0
Vertical position
0
Vertical height
Clock phase 0
Sampling clock 0
MENU EXIT
Back Watch TV
Sampling clock
PC Setting 2/2
0
Reset OK
MENU Back EXIT Watch TV
51
0
0