Connecting A Computer; To Connect A Computer - Toshiba 42WL58A Owner's Manual

Equipment connections

Connecting a computer

• Before connecting PC and audio cables, remove the back terminal covers (see page 10).
• An analog RGB (15 pin) computer cable can be connected.

To connect a computer

Computer
Connect a PC cable from the computer to the RGB/PC terminal on the back of the TV.
The following signals can be displayed:
• VGA: VESA 640 x 480 @ 60 Hz • SVGA: VESA 800 x 600 @ 60 Hz • XGA: VESA 1024 x 768 @ 60 Hz
However, these signal formats are converted to match the number of pixels of the LCD panel.
Therefore, the TV may not display small text properly.
Notes:
• Some PC models cannot be connected to this TV.
• There is no need to use an adapter for computers with DOS/V compatible mini D-sub 15 pin terminal.
• A bar may appear in the upper, lower, right or left side of the screen, or parts of the picture may be obscured
depending on some signals. This is not the malfunction.
• If the edges of the picture are stretched, readjust the picture position adjustments in the PC Setting menu.
• Depending on the specification of the PC you are playing the DVD-Video on, and the DVD's title, some scenes may
be skipped, or you may not be able to pause during multi-angle scenes.
Signal names for mini D-sub 15 pin connector
Pin assignment for RGB/PC
terminal
11 15
6
1
Audio cable
for PC-to-TV connection
Conversion adapter
(if necessary)
Pin No.
1
2
3
4
10
5
5
6
7
8
TV back view
RGB PC cable
Signal name Pin No.
R
G 10
B 11
NC (not connected) 12
NC 13
Ground 14
Ground 15
Ground
Mini D-sub 15 pin
Signal name
9 NC
Ground
NC
NC
H-sync
V-sync
NC
49