Table of Contents
Advertisement
DIGITAL TELEPHONE
To Record a Message:
1. Call up the message that you
want to add to or change.
2. Press the
#
button to access
alpha characters.
3. Press the
*
button to move the
cursor (–) to the desired
position.
4. Press the button
corresponding to the letter
which you want to enter.
5. If you want to enter a number,
press the
#
button to change
to numeric characters. Press
the
#
button again to return to
alpha characters.
48
will remain at your station until canceled. It will then be erased and the
original programmed message will be restored.
Use the following procedure when adding to a preprogrammed message
or when leaving a new message:
(See To Leave a Message.)
(Refer to the figure on the following page for an explanation of the
dialpad buttons.)
(The left edge of the display to program a new message, or two spaces
to the right of the preprogrammed message to add information.)
Use the
0
button to shift from letter to letter on that button. For example:
I If you press 3, a D will be displayed. By pressing 0, the D will change
to E. By pressing
0
again, the E will change to F. Press
the F will change to D.
I To enter spaces, press 1.
Numbers are also entered on the dialpad.
1
button moves
cursor to the right
(also used to
access special
characters)
*
button moves the
cursor to the left
0
button is used to shift between
the three letters on each alpha button
(also used to access special characters)
Each button has three letters that
are used in messaging; the
is used to shift between the letters
ABC
DEF
1
2
3
GHI
JKL
MNO
4
5
6
#
button alternates
PRS
TUV
WXY
7
8
9
between alpha
and numeric
0
#
*
characters
PERCEPTION e
ex
&
0
again and
0
button
Advertisement
Table of Contents
