Base Station Settings - BT Synergy 500 Twin User Manual

Base station settings

To adjust the base ringer volume
You can use your handset
to change the volume on the
base unit. The volume
levels range from
is off and
0
The pre-set level is
Press the
button.
Press the
button.
6
Choose a setting from
(the volume level can be
heard during selection).
Press the
button to confirm.
To adjust the base ringer melody
You can use your handset
to change the melody on the
base. You can choose from
melodies. The pre-set
5
melody is
Press the
button.
Press the
button.
5
5
, where
0-3
is maximum.
3
.
3
QUICKDIAL
button, then the
1-3
QUICKDIAL
.
3
QUICKDIAL
button, then the
Choose between the
different melodies
KEYPAD
(the melodies can be heard
during selection).
Press the
button. You will hear a
confirmation tone.
To change the base station PIN
If you change your base
station PIN, keep a record
of the new number by
writing it in the space
provided on page 7.
Press the
button.
Press the
button.
0
0
Enter the current 4-digit
base station PIN (original
PIN
setting 0000).
Press the
button. Enter the new 4-digit
PIN you want.
PIN
Press the
button.
Re-enter the new PIN.
PIN
Press the
button. You will hear a
confirmation tone.
1-5
QUICKDIAL
QUICKDIAL
button, then the
QUICKDIAL
QUICKDIAL
QUICKDIAL
16