Impex POWERHOUSE PHC 764 Owner's Manual page 7

STEP 3 (See Diagram 3)
A.) Attach the Leg Developer (#19) to the Leg Developer Holder (#5). Secure it with an Axle
(#35), two ¾" Washers (#48), and two M10 x 5/8" Allen Bolts (#52).
B.) Insert one M8 x 2 1/8" Allen Bolt (#62) through the hole on the Lat Bar Frame (#15) and
secure it with a M8 Aircraft Nut (#63).
C.) Slide the Weight Holder (#16) onto the Lat Bar Frame. Insert the Lat Bat Frame into the top
opening on the Leg Developer Holder. Use the Lock Knob (#31) to secure the Lat Bar.
6
DIAGRAM 3