Use Of The Wheelchair As A Seat In A Vehicle - Invacare Spectra XTR User Manual

13.2

Use of the wheelchair as a seat in a vehicle

Note
The following section does not apply to models or configurations which may not be
used as a vehicle seat. These are identified by the following labels on the lashing
eyes:
Please note
In order to use a wheelchair as a motor vehicle seat, it needs to be equipped with attachment
points to enable anchoring in the motor vehicle. These accessories may be included in the
standard scope of wheelchair order and delivery in some countries (UK for example), but may
also be obtained from Invacare® as an option in other countries.
This power wheelchair complies with the requirements of ISO 7176-19:2001 and may be used as a
vehicle seat in connection with an anchoring system that has been checked and approved in
accordance with ISO 10542. The wheelchair has undergone a crash test in which it was anchored
in the transporting vehicle's direction of travel. Other configurations were not tested. The crash test
dummy was secured using pelvic and upper body safety belts. Both types of safety belt should be
used in order to minimise the risk of injuries to head or upper body. It is imperative that the
wheelchair is inspected by an authorised dealer before being used again after being involved in a
crash. Alterations to the wheelchair anchoring points may not be carried out without the
manufacturer's permission.
CAUTION: There is an injury hazard if a backrest which is not suitable for the
transportation of passengers is used!
• Angle-adjustable backrests which are manually adjusted using a self-arresting quick-
disconnect are NOT approved for the transportation of passengers!
154