GE PCVH480EKWW Series Service Manual page 51

Service Mode test
Software version
t01
Error codes
t02
User interface test
t03
Door switch test
t04
Dryer motor test
t05
Thermistor & 1600W heater test
t06
Thermistor & 600W heater test
t07
Moisture sensor test
t08
Service Test Mode (cont.)
Start/Pause Displays software version number.
Power Returns to service mode screen.
Start/Pause Displays error codes.
Start/Pause Clears highlighted error code from
machine (during t02 test).
Power Returns to service mode screen.
Start/Pause LEDs light up.
Any button but Hear beep as button is pressed
Power (during t03 test).
Power Returns to service mode screen.
Start/Pause Displays shall show "dO or OO".
Power Returns to service mode screen.
Start/Pause Dryer motor will rotate.
Power Returns to service mode screen.
Start/Pause Displays temperature & dryer motor
will rotate.
Power Returns to service mode screen.
Start/Pause Displays temperature & dryer motor
will rotate.
Power Returns to service mode screen.
Start/Pause Displays the status of touch sensors.
Power Returns to service mode screen.
Sequence Note
"dO": Door is open.
"OO": Door is closed.
"on": Motor rotate.
"dO": Door is open.
The heater shall then
be turned on for a
maximum of 5 minutes.
The heater shall then
be turned on for a
maximum of 5 minutes.
Touch the sensor with
hand "1" : be detected
"0": Is not detected.