Graco Size 4 Me Replacement Manual

To Remove Existing Harness Tongues and Buckle and Attach Replacement Buckle
1
Squeeze handle and
pull up on headrest to
highest position.
4
Pull harness straps
through seat back and
seat pad.
7
Remove and
discard tongues.
11
Re-insert straps back onto splitter plate.
Size 4 Me ® Buckle Replacement Guide
5
Remove chest clip.
DO NOT DISCARD
the chest clip.
8
Slide NEW buckle
onto harness straps.
MAKE sure not to
twist straps.
2
To loosen straps, lift lever
and pull harness straps.
6
9
Re-attach chest clip.
MAKE sure not to
twist straps.
Turn page over to
the assembly
Steps 12 to 20
for the buckle
replacement.
©2013 Graco PD246350A 5/13
3 Remove harness
strap loops from
splitter plate.
Unbuckle harness
by tilting top of
buckle down,
press top of
red button, and
pull tongues
out of buckle.
10
Re-insert straps through slots
in seat pad and seat back.
See carseat owner's manual
for proper height setting for
your child.