Assembling The Ninja; Assembly And Use For The Single Serve Cup - Ninja Pulse BL205 Owner's Manual

Assembling the Ninja

Kitchen System Pulse™
®
PLEASE KEEP THESE IMPORTANT
SAFEGUARDS IN MIND WHEN
USING THE APPLIANCE:
IMPORTANT: Always place the
attachment in the 40-oz. bowl
before adding any ingredients.
IMPORTANT: Attachments are not
interchangeable.
CAUTION: Blades are sharp! Use
extreme caution when handling
the blade assemblies. Always hold
them by the shaft.
IMPORTANT: When mixing dough.
Mix dough for up to 1 minute, then
let appliance rest for 1 minute
before mixing again.
IMPORTANT: Never run the
appliance empty.
CAUTION: Never attempt to remove
the container while the appliance is
still running.
WARNING: Never leave the
appliance unattended while in use.
8 TOLL FREE: 1-877-646-5288
BL205_30_IB_ENG_110812_1.indd 8-9
BEFORE FIRST USE
1
Remove all packaging material and labels
from the appliance.
2 Wash the lids, bowl, single serve cups
and attachments in warm, soapy water
with a soft cloth. Use caution when
washing the blade assemblies as the
blades are very sharp.
3 Rinse and dry thoroughly.
4 The bowl, single serve cups, lids and
attachments are all dishwasher safe.
It is recommended that the lids and
attachments be placed on the top rack.
Ensure that the attachments are removed
from the containers before placing in the
dishwasher.
5 Wipe the motor base clean with a damp
cloth.

Assembly and Use for the Single Serve Cup

ASSEMBLY PULSE
Fig. 1
Fig. 2 Fig. 3
For best results, use short "PULSES"... Practice makes perfect!!
IMPORTANT: Make sure that the motor
base is plugged in for use.
1 Place the motor base on a clean, dry,
level surface such as a counter or table
top.
2 Add ingredients to the single serve cup.
3 Place the single serve blade onto the cup
and screw it tightly until you have a good
seal. (Fig. 1)
4 Turn the single serve cup upside down
and place it onto the motor base, aligning
the tabs on the cup with the motor base.
Turn to the left, the unit is ready for use.
(Fig. 2)
5 Press down on the top of the cup in short
intervals to activate. (Fig. 3)
REMOVAL
Fig. 4 Fig. 5
6 When you have reached your desired
consistency, stop the appliance by
removing your hand from the single
serve cup. Then turn the single serve cup
to the right (Fig. 4) and pull straight up
to remove. (Fig. 5)
NOTE: Do not overfill! To avoid spilling,
do not add ingredients past the "Max" fill
line.
7 Turn the cup upright and remove the
single serve blade by twisting the blade
assembly to the left.
8 Place the To-Go drinking lid onto the
single serve drink cup, twist to seal and
enjoy!
9 Make sure that the motor base is
unplugged when not in use.
www.ninjakitchen.com 9
11-08-12 1:51 PM