Yard Works YW65PFF Instruction Manual page 15

3. Hold the recoil starter (5) handle firmly and pull it slightly until the
compression position is reached, and then pull it swiftly all the way out.
Slowly return the recoil starter (5) handle to its original position (Fig. 11).
4. Once the motor has started move the choke lever (7) to the run
position and the throttle lever (3) to the slow
engine idle no load for 3 minutes.
5. The throttle lever (3) can now be adjusted to obtain the desire pressure at
the outlet.
Adjusting the Throttle
The throttle is used to regulate the RPM of the engine, which also controls the
water flow out of the discharge outlet.
1. To increase the speed of the engine and water flow move the throttle
lever (3) to the right towards the fast symbol
2. To decrease the speed of the engine and water flow, move the throttle
lever (3) to the left towards the slow symbol
Stopping the Engine
1. Decrease the speed of the engine and water flow by moving the throttle
lever (3) to the left towards the slow symbol
10-20 seconds.
2. Then move the fuel/On-Off lever (6) to the left/closed position towards the
fuel symbol
OPERATION (cont.)
(Fig. 13).
position and let the
(Fig. 12).
.
and allow to idle for
14
Recoil starter handle
Fig. 11
Fig. 12
Fig. 13