Table of Contents
Advertisement
STEP 4 (See Diagram 4)
A.) Attach the Seat Pad (#42) to the Seat Post (#6). Secure it with two M8 x 1 5/8" Allen
Bolts (#85) and Ø 5/8" Washers (#101).
B.) Insert the Seat Post into the opening on the Right Seat Support (#7). Secure it with a
Lock Knob (#73) to lock the Seat Post at desired height.
C.) Insert the Foam Tube (#23) halfway through the hole on the Leg Developer (#8). Push
two Foam Rolls (#58) onto the Tube from both ends. Plug a Foam Roll End Cap (#59)
into each end of the Tube.
12
DIAGRAM 4
Hide quick links:
Advertisement
Table of Contents
