Manually Add Your New Network Connection - Samsung Galaxy Express User Manual

accessible Wireless Access Point (WAP). These WAPs can
either be Open (unsecured) as within most Hot Spots, or
Secured (requiring knowledge of the Router name and
password).
Turning Wi-Fi On
By default, your device's Wi-Fi feature is turned on. Turning
Wi-Fi on makes your device able to discover and connect to
compatible in-range WAPs.
1. From the Home screen, tap
2. Tap the ON/OFF slider, located to the right of the Wi-Fi
field, to turn Wi-Fi ON
Connect to a Wi-Fi Network
1. From the Home screen, tap
The network names and security settings (Open
network or Secured with WEP) of detected Wi-Fi
networks are displayed in the Wi-Fi networks section.
2. Tap the network you want to connect to.
Note: When you select an open network, you will be
automatically connected to the network.
3. Enter a wireless password if necessary.
Settings.
.
ON
Settings Wi-Fi.

Manually add your new network connection

Tap Add Wi-Fi network.
1.
Enter the Network SSID. This is the name of your
2.
Wireless Access Point.
3. Tap the Security field and select a security option. This
must match the current security setting on your target
WAP.
If secured, you will also need to enter the password.
4.
5. Tap Save to store the new information and connect to
your target WAP.
Note: The next time your device connects to a previously
accessed or secured wireless network, you are not
prompted to enter the WAP key again, unless you reset
your device back to its factory default settings.
Turning Wi-Fi Off
1. From the Home screen, tap
2. Tap the ON/OFF slider, located to the right of the Wi-Fi
field, to turn Wi-Fi OFF
Settings.
.
OFF
Connections 142