Using The Network Drive; Setting The Network Drive - Sony DPT-S1 User Manual

For details on Wi-Fi settings, see page 43.
General notes on Wi-Fi connectivity
 Tap a network SSID in the [Wi-Fi Networks] list to
display the access point's status and related
information.
 Before setting the Wi-Fi network connection, refer
to the instructions of the Wi-Fi router, and check the
SSID and security method.
 You can configure up to 20 Wi-Fi network
connections.
 The device does not support certain custom Wi-Fi
network security systems. For details, refer to your
Wi-Fi router's instruction manual.
 If you change the password of the connected Wi-Fi
router, enter the new password and reconnect it.
 To use a static IP address, press the
button in [Wi-Fi Settings]  tap [Advanced]  tap
[Use Static IP]. Select the option and enter the
address. When the setting is completed, press the
(Back) button to return to [Wi-Fi Settings].
Do not change this setting unless instructed to by a
network administrator, as the Wi-Fi network
connection may not be established correctly.
 If the SSID is hidden on the Wi-Fi router, it will not be
displayed in the [Wi-Fi Networks] list of the device.
In this case, manually set up the Wi-Fi network.
 The access point may filter access by MAC address.
Check the MAC address by pressing the
button  tap [Settings]  [About]  [Device
Information], then register the MAC address with
the access point to establish a Wi-Fi connection.
 To check the network speed and security method
for the connected Wi-Fi network, press the
(Menu) button in [Wi-Fi Settings]  tap [Connection
Information].
 An access point, once configured, can be connected
to again simply by tapping it in the [Wi-Fi Networks]
list and tapping [Connect].

Using the Network Drive

By using the WebDAV protocol, you can access a
specific network drive to synchronize documents
between the Digital Paper device and the network
drive, or transfer documents from the device to the
network drive. Connect to a Wi-Fi network
beforehand (page 38).

Setting the Network Drive

You can set the log in information, On/Off of Auto
Sync, and download destination. Check with the
network administrator for setup information.
1
Press the
(Menu)
[Network Drive Settings].
2
Tap [Server Settings]  tap the input area and
enter each item using the on-screen keyboard.
(Home)
Item
[Server]
[Port]
[Username]
[Password]
(Home) button  tap [Settings] 
Description
Enters the URL of the network drive.
Enters the port number.
Enters the username to log in the
network drive.
Enters the password to log in the
network drive.
43