Setting Up A Wi-Fi® Network - Sony DPT-S1 Quick Start Manual

Setting up a Wi-FI® Network
Setting up a Wi-Fi connection
To connect to the internet wirelessly, set up a connection to a
wireless (Wi-Fi) network.
Tip
Supported security methods are WEP, WPA/WPA2 PSK, and 802.1x EAP.
Turning on the Wi-Fi connection
1
Press the (Home) button.
2
Tap [Settings]  [Wireless Network Settings].
3
Tap [Wi-Fi] to check the check box.
The following questions will determine the most suitable
case for setting the Wi-Fi network connection.
1 Are you using a home or office
Wi-Fi connection?
Yes
2 Is your Wi-Fi router WPS*
compatible?
Yes
3 Does your Wi-Fi router have a WPS
button?
Yes
A
Note
ˎ Connection and communication fees apply when using a Wi-Fi router. ˎ
ˎ Wireless communication exposes risks to wiretapping, manipulation and illegal ˎ
invasion into the network.
Unless absolutely necessary, Sony recommends that you use safe security
methods (WPA/WPA2-PSK, etc.) and avoid non secure or WEP access.
ˎ When connecting to a Wi-Fi network at home, refer to your Wi-Fi router's ˎ
instruction manual for details. When connecting to a Wi-Fi network in an office
or group, check with the network administrator for details.
About WPS
WPS (Wi-Fi Protected Setup) lets you easily make a Wi-Fi
connection. To use the WPS, your Wi-Fi router must be
compatible with WPS. Refer to your Wi-Fi router's instruction
manual for details.
4
No
D
No
C
No
B
* WPS: Wi-Fi Protected Setup
A : Connecting to a Wi-Fi router with a WPS button
By using the "WPS" button on a Wi-Fi router, you can make the
connection or security settings automatically.
1
Tap [Wi-Fi]  [Wi-Fi Settings].
2
Tap [WPS Push-Button Configuration]  [Start].
3
On your Wi-Fi router, press the "WPS" button within 2
minutes.
4
After the setup completion screen appears on the device,
tap [OK].
B : Connecting to a Wi-Fi router with WPS PIN
input
By using the PIN (Personal Identification Number), you can
make the connection or security settings easily.
1
Tap [Wi-Fi]  [Wi-Fi Settings].
2
Tap [Add Wi-Fi Network]  [WPS PIN Method]  [Start].
A PIN code will be shown on the screen of the device.
3
Enter the PIN code into your Wi-Fi router.
Refer to your Wi-Fi router's instruction manual for details.
4
Tap [OK] on the screen of the device.
: Connecting to a Wi-Fi router by selecting a
C
network name
Connect to one of the available Wi-Fi networks listed. Find out
the Wi-Fi router's name and password beforehand and take a
note.
Note
Depending on the security method of the Wi-Fi router, a password may be
required.
1
Tap [Wi-Fi]  [Wi-Fi Settings].
2
Tap your Wi-Fi router's SSID in the [Wi-Fi Networks] list.
When the SSID is not listed, tap [Scan].
If prompted for a password, tap the input area and enter the
password using the on-screen keyboard.
3
Tap [Connect].
Tip
Using TLS under 802.1x EAP requires other settings, certificate installation, etc.
Check with the network administrator for details.
D : Connecting to a public Wi-Fi network
You can access a network even when you go out by using the
available public Wi-Fi network services.
1
Follow steps of "C: Connecting to a Wi-Fi router by
selecting a network name" to connect to a public Wi-Fi
network.
The [Browser] application may start automatically.
Otherwise, press the (Home) button, then tap [Browser].
2
Follow the instructions on the homepage of the Wi-Fi
service provider to complete the Wi-Fi connection.