Download Print this page

Graco SoundSleep Owner's Manual

Nursery monitor

Advertisement

Quick Links

SoundSleep
Nursery Monitor
Owner’s Manual
Please save for future use.
Model No. M-
Channels C-
Serial No. S-
Dear Customer,
Please fill in the model and serial
numbers above from the label inside
the battery compartment of your new
Nursery Monitor.
Congratulations on your purchase of
a Graco
Graco is the recognized leader in the design and manufacture of quality baby
products. We believe your new Graco
Before using your Nursery Monitor, please take a few minutes to read this
Owner’s Manual. The short time you spend reading these instructions will
help you use your Nursery Monitor properly.
Customer Satisfaction
Our goal is to make every product the best it can be! We are also committed to
supporting our products after purchase. If you would like to speak with Graco about
your product, please contact our Customer Service Department at 1-800-345-4109
or visit our Internet website, www.gracobaby.com. Our knowledgeable staff will be
ready to answer any questions you may have concerning parts, use or maintenance.
When you call, please have the model and serial numbers ready so your call may be
processed quickly and efficiently.
Please read this Owner’s Manual completely BEFORE first use of
your monitor! Pay special attention to the warnings. Keep these
instructions for future reference.
© 2000 Graco 902-4-00
Nursery Monitor!
®
Nursery Monitor is a wise choice.
®
1
WARNING
Failure to follow these warnings and the assembly instructions could
result in serious injury or death.
This device is designed only to monitor the sounds of your child. It will not alert
you to your child’s silent activities. This product is not designed or intended for
use as a medical monitor. Always be sure that both the transmitter and receiver
are working properly and are within range of each other.
! !
STRANGULATION HAZARD. Keep the adapter cords out of the reach of
children. Do not use with extension cords.
! !
DO NOT place the Nursery Unit or its cord within your child’s reach. Do not put
the Nursery Unit inside a crib or playard.
! !
DO NOT OPEN THE TRANSMITTER, RECEIVER OR ADAPTER. NO USER-
SERVICEABLE PARTS INSIDE. RISK OF ELECTRIC SHOCK, FIRE OR DEATH.
! !
DO NOT immerse any part of the Nursery Monitor in water. Clean only
with a dry cloth.
! !
DO NOT place unit near water and moisture. Do not use the Nursery Unit
outdoors. Do not use the monitor near possibly wet areas, such as a bathtub,
shower, wash basin, sink, laundry tub, swimming pool, wet basement, etc.
! !
Keep Nursery Monitor away from heat sources, such as fireplaces, radiators, stoves,
and TVs or other appliances. Heat can damage the case or electrical parts.
! !
Use ONLY with 110-120 volt AC electrical outlets.
! !
Protect the AC adapter cords. Place them so they are not walked on or pinched by
furniture or other items.
! !
DO NOT use the monitor if:
-
The adapter cords or plugs have been damaged.
-
The unit has been exposed to liquids.
-
Unit has been dropped or is damaged.
! !
Allow for proper ventilation when units are in use. Do not cover the Nursery or
Parent’s Unit with any object such as a blanket. Do not place it in a drawer or in any
location which would muffle the sound or interfere with the normal flow of air.
FCC ID# M6Y003020049R
M6Y003020049T
2

Advertisement

loading

Summary of Contents for Graco SoundSleep

  • Page 1 Our goal is to make every product the best it can be! We are also committed to Protect the AC adapter cords. Place them so they are not walked on or pinched by supporting our products after purchase. If you would like to speak with Graco about furniture or other items.
  • Page 2: Product Features

    Slot *Both the Parent’s Unit and the Nursery Unit MUST be set to the same channel. If receiver detects sounds from another nursery monitor or cordless phone, set both units to the other channel. If problem persists, contact Graco. 902-4-00...
  • Page 3 To use AC adapters, plug the connector on the cord into the AC adapter jack on the side of the unit. Then plug adapter into a standard wall outlet. Use ONLY the Graco adapters included with the unit. Do not use these adapters ®...
  • Page 4: System Setup

    System Setup Solving Problems SETTING UP THE MONITOR Most problems have a simple solution. First, check that: 1. Check that both Nursery Unit and Parent’s Unit are set to the same channel. Power is turned ON for both units Both units are plugged in (or battery is fresh in Parent’s Unit) 2.

This manual is also suitable for:

Soundsleep m series