Iron Grip Sport IGS 16 Owner's Manual page 16

STEP 9 (See Diagram 9)
A.) Attach the Bench Press Base (#32) to the pivot on the Upper Frame (#5). Align the holes and
insert a 8" Bench Press Axle (#44) through the holes. Secure the Axle with two M10 x ½"
Socket Set Screws (#113).
B.) Attach the Bench Press Arm (#1) to the Bench Press Base (#32). Align the holes and insert a
8" Bench Press Axle (#44) through the holes. Secure the Axle with two M10 x ½" Socket Set
Screws (#113).
C.) Thread a T-shaped Pull Pin Set (#69) through the hole on the Bench Press Base (#32) to obtain
the desired Bench Press position.
D.) Attach two Pulleys (#84) to the open bracket on the back of Bench Press Base (#32). Secure
them with one M10 x 2 ¾" Allen Bolt (#104), two Ø ¾" Washers (#118), and one M10 Aircraft
Nut (#125).
15