Esotec_Esotar.fm Seite 2 Montag, 12. Januar 2009 2:23 14 Introduction Dear Music Lover, Thank you for your decision to acquire Dynaudio Automotive loudspeakers for after- market installation. The Dynaudio Esotec and Esotar Systems have been developed to the same high standard as the company’s renowned home audio, professional studio and multimedia loudspeaker products.
To observe all relevant matters and thus maximize the tremendous performance potential of your Dynaudio in-car loudspeaker system, consult your authorized Dynaudio Automotive loudspeaker dealer for assistance. Your dealer has the knowledge and expertise to perform a high quality aftermarket installation.
Page 5
Dynaudio holographic safety label is on the driver. The warranty is valid only if the product is purchased from an authorized Dynaudio Automotive aftermarket dealer. All warranty claims must be accompanied by a copy of the original purchase invoice and warranties are only valid in the country or market of original origin or distribution.
Ø 285 mm Mounting hole Mounting hole min. Ø 136 mm min. Ø 260 mm 67 mm 143 mm max. 5.2 mm max. 7.5 mm 15 mm 35.5 mm (at max. cone excursion) (at max. cone excursion) Esotec / Esotar Series...
Page 12
To conveniently facilitate flush mount installations, Dynaudio offers installation trim rings featuring cut-outs that perfectly fit the outline of the Esotar driver frames.
Page 13
Esotec_Esotar.fm Seite 12 Montag, 12. Januar 2009 2:23 14 Connecting the loudspeakers Connecting the Esotec loudspeakers The Esotec systems include a crossover. See the following instructions to connect the crossover and the loudspeakers. 2-way crossover X 252 Terminal label Connections 1 To power amplifier: + terminal 2 To power amplifier: –...
Page 14
Connect terminal 8 to the – terminal of the tweeter. 3. To connect the power amplifier: Connect terminal 1 to the + terminal of the power amplifier. Connect terminal 2 to the – terminal of the power amplifier. Esotec / Esotar Series...
Page 15
4 To tweeter: + terminal, +2dB 5 To tweeter: + terminal, ±0dB 6 To tweeter: + terminal, -2dB 7 To midrange: – terminal 8 To midrange: + terminal, +2dB 9 To midrange: + terminal, ±0dB 10 To midrange: + terminal, -2dB Esotec / Esotar Series...
Page 16
2 dB 4. To connect the power amplifier Connect terminal 2 to the + terminal of the power amplifier. Connect terminal 3 to the – terminal of the power amplifier. Esotec / Esotar Series...
Page 17
Esotec_Esotar.fm Seite 16 Montag, 12. Januar 2009 2:23 14 Connecting the loudspeakers Connecting the Esotar loudspeakers Since the Esotar speakers are meant to use active filtering, Dynaudio recommends following crossover frequencies: Esotar Esotar Esotar Esotar 1200 Filter type high-pass band-pass...
1.25 kg 8.8 kg Overall dimensions (Ø x D) 146 x 70 mm 175 x 77 mm 166 x 71 mm 200 x 88 mm 239 x 86 mm 169 x 78 mm 297 x 162 mm Esotec / Esotar Series...