Summary of Contents for Dynaudio ESOTEC Car Stereo System
Page 1
Owners Manual High-End Mobile Loudspeaker Systems Home Systems | Professional | Automotive...
Page 2
Thank you for your decision to acquire Dynaudio Automotive Loudspeakers for after-market installation. The Dynaudio Esotec Systems range has been developed to the same high standard as the company's renowned home audio and professional studio loudspeaker products. The Dynaudio Automotive Esotec range is specifically engineered for optimum performance in a vehicle to ensure the most precise in-car music reproduction achievable.
About this installation manual This installation manual provides all technical specifications, installation dimensions and crossover connection instructions for the Dynaudio Esotec series. To realize the full potential of Dynaudio Esotec systems, some areas should be addressed, as touched upon in the following pages.
Dynaudio holographic safety label is on the driver. The warranty is valid only if the product is purchased from an authorized Dynaudio Esotec dealer. All warranty claims must be accompanied by a copy of the original purchase invoice and warranties are only valid in the country or market of original origin or distribution.
Technical specifications Tweeter/Midrange Nominal impedance Recommended frequency range Power handling • Nominal long term IEC • Transient Net weight Overall dimensions (Ø x D) Woofer Nominal impedance Recommended frequency range Power handling • Nominal long term IEC • Transient Net weight Overall dimensions (Ø...
Page 6
900 Hz / 3500 Hz 4 Ω 100 W 120 W 200 W 150 W 200 W – 200 W 38 x 84 x 145 mm 43 x 104 x 175 mm 0.33 kg 0.60 kg 4 Ω – Dynaudio Mobile Systems...
Page 10
Esotec systems overview Two-way systems System 222 System 242 System 242 GT MW 162 GT Bass High MW 152 – MD 102 MW 162 – MD 102 – MD 102 Crossover X 252 X 252 X 252 Dynaudio Mobile Systems...
Page 11
Three-way systems System 342 System 362 Esotec Series Bass High MW 162 MD 142 MD 102 MW 172 MD 142 MD 102 Technical specifications Crossover X 362 X 362...
2 To power amplifier: – terminal 3 To woofer: + terminal 4 To woofer: – terminal 5 To tweeter: + terminal, +2dB 6 To tweeter: + terminal, standard 7 To tweeter: + terminal, –2dB 8 To tweeter: – terminal Dynaudio Mobile Systems...
Page 13
1. To connect the woofer Connect terminal 3 to the + terminal of the woofer. Connect terminal 4 to the – terminal of the woofer. 2. To connect the tweeter The terminals 5, 6 and 7 provide an adjustment possibility of the sound level. This makes it possible to adjust the level according to the placement of the speaker in the car and to your personal preference.
Page 14
4 To tweeter: + terminal, +2dB 5 To tweeter: + terminal, standard 6 To tweeter: + terminal, –2dB 7 To midrange: – terminal 8 To midrange: + terminal, +2dB 9 To midrange: + terminal, standard 10 To midrange: + terminal, –2dB Dynaudio Mobile Systems...
Page 15
1. To connect the woofer Connect terminal 1 to the – terminal of the woofer. Connect terminal 2 to the + terminal of the woofer. 2. To connect the tweeter The terminals 4, 5 and 6 provide an adjustment possibility of the sound level. This makes it possible to adjust the level according to the placement of the speaker in the car and to your personal preference.