Making The Connections - Panasonic SC-AK980 Operating Instructions Manual

Making the connections

Connect the AC power supply cord only after all the other connections have been made.
Antenna connections Antenna connections
Place the antenna where reception is best.
■ FM indoor antenna
Set the voltage Set the voltage
Use a fl at-head screwdriver to set the voltage selector
on the rear panel to the appropriate position for the
area in which this system is used.
6
RQT8043
RQTX0273-2M_us.indd 6 RQTX0273-2M_us.indd 6
■ AM loop antenna
Adhesive
tape
Note:
Do not screw too tightly.
Otherwise, the screwdriver
goes around in circle and
cannot be fixed.
Power supply connection Power supply connection
Insertion of connector
Even when the connector is perfectly inserted,
depending on the type of inlet used, the front part of
the connector may jut out as shown in the drawing.
However there is no problem using the unit.
Appliance inlet
If the power plug does not fi t your socket, use the
power plug adaptor (included).
For your reference
To save power when the unit is not to be used for a
long time, unplug it from the household AC outlet.
You will need to reset some memory items after
plugging in the unit.
Note:
• The included AC power supply cord is for use with
this unit only.
Do not use it with other equipment.
• Do not use an AC power supply cord from other
equipment.
Use a Phillips-head
screwdriver, etc.
Stand the antenna
up on its base.
Connector
To household AC outlet
Push
Red White
Black
Click!
12/21/09 12:21:24 PM 12/21/09 12:21:24 PM