Panasonic SC-AK980 Operating Instructions Manual page 11

Checking the track information
You can view the information of the current track from the display
panel.
Press [DISPLAY] repeatedly during play or pause.
Elapsed play time Remaining play time
Elapsed Remaining
play time play time
Playing bit rate Tag
(during play only) (Artist)
Note:
• "NO TAG" is displayed if titles with tags have not been entered.
• This unit can display album, track and artist name with MP3 ID3
tags (version 1.0 and 1.1).
• Titles containing text data that the unit does not support may be
differently displayed.
• ID3 is a tag embedded in MP3 track to provide information about
the track.
• Titles entered with 2-byte code cannot be displayed correctly on
this unit.
Advanced play Advanced play
Program play
This function allows you to program up to 24 tracks.
1
Press [6, CD] and then [7] (stop).
2
Press [PROGRAM].
"PGM" appears.
3
Press [¶ DISC] and then [
4
Press the numeric buttons to select your desired track.
Repeat steps 3 and 4 to program other tracks.
5
Press [6, CD] to start play.
1
Press [¶ DISC] and then [
2
Press [7] (stop).
3
Press [PROGRAM].
4
Press [5/∞, ALBUM] to select your desired album.
RQTX0273-2M_us.indd 11 RQTX0273-2M_us.indd 11
Album Track
name name
Tag Tag
(Track) (Album)
¶ ¶
1] ~ [ 5] to select the disc.
¶ ¶
1] ~ [ 5] to select the disc.
5
Press [4 / 1] or [¡ / ¢] to select the track.
To select a track directly, press the numeric buttons after
pressing [4 / 1] or [¡ / ¢].
6
Press [OK].
Repeat steps 4 to 6 to program other tracks.
7
Press [6, CD] to start play.
For two-digit track, press [h10] once then the two digits.
For three-digit track, press [h10] twice then the three digits.
Cancel Press [PROGRAM] in the stop mode.
program mode
Replay the Press [PROGRAM] then [6, CD] in the stop
program mode.
Add to the
program
Repeat steps 3 and 4 in the stop mode.
Repeat steps 4 to 6 in the stop mode.
Press [4 / 1] or [¡ / ¢] when "PGM" is
Check
program displayed in the stop mode.
contents
The track number, program order and disc
number are displayed:
The program order is displayed followed by the
album number and track number.
Clear the last Press [DEL] in the stop mode.
track
Clear all Press [7] (clear) in the stop mode.
programmed "CLEAR ALL" is displayed.
tracks
Note:
• You cannot program CD-DA together with MP3 tracks.
• The program memory is cleared when you change a disc or open
the disc tray.
• You cannot program more than one disc.
Repeat play
You can repeat program play or other selected play mode.
Press and hold [– REPEAT].
"REPEAT ON" and " " are displayed.
To cancel
Press and hold [– REPEAT] again.
"REPEAT OFF" is displayed and "
Note:
You can use repeat mode with "Program play" (\ see left) and
"Play Mode function" (\ page 10).
Program
Track
order
number
" is cleared.
12/21/09 12:22:02 PM 12/21/09 12:22:02 PM
11
RQT8043