Table of Contents
Advertisement
BASIC OPERATION
DITITAL BUTTONS
1). While playing songs, press the Digital buttons to directly select the songs you need.
2). If the desired track number is # 10 or above, you can select it by pressing the 10+ button once, and
then pressing a Digital button (1--10). For example: If the 16th song is needed, you can press the 10+
button followed by the 6 button.
PROGRAM
● In play VCD/CD disc, press
the Program button, the TV
Screen shows:
1.
If the player is in the PBC ON status, and the programmed songs are being play, this operation will
result in PBC turning off.
2.
Input the number that you want at the place of the cursor; move the cursor to ``START``; press the
Play/Enter button, the songs will play in the specified order.
3.
While programming, press the Clear button to eliminate the digitals that you input.
4.
To cancel programmed play: press the Program button again, the cursor will move to ``Stop``
automatically; press Play/Enter button, the cursor move to ``EXIT`` automatically, press Play/Enter
again to cancel programmed play.
MP3 DISC PLAYING FUNCTION
1). Press the Eject button on the remote control (or front panel) to open the disc tray, put in
an MP3 disc, then press the Eject button to close the disc tray. This unit begins to read it,
and the TV screen will display the following figure,
●In play DVD disc, press the Program button,
the TV screen shows:
-13-
Advertisement
Table of Contents
