Table of Contents
Advertisement
3. You can switch among system menus by selecting MENU and using [+] or [-].
( * SYSTEM MENU [1] *)
MENU :
[1] [2] [3]
DEPTH :
m ft fa PB
SPEED :
kt MPH KPH
° C ° F
TEMP :
F/A LEVEL :
WEAK MED STRG
/
: TO SELECT ITEM.
-/+
TO SET CONDITION.
:
4. Press [ ] or [ ] to select menu item.
5. Press [+] or [-] to set condition.
6. Set the [MODE] switch in any other position to register selection and close the menu.
2.11.3 Main menu description
Menu item
NOISE LIMITER
HUE SELECTION
GAIN ADJUST (50kHZ or 200KHZ)
CLUTTER LEVEL
ZOOM MARKER DISPLAY
MARKER
GO TO SYSTEM MENU
(* SYSTEM MENU [2] *)
MENU :
[1] [2] [3]
NAV DSP :
OFF L/L R/B CSE
FORMAT :
NMEA CIF
SPD SEL :
OFF
OWN NMEA
TMP SEL :
OFF
OWN NMEA
TMP GRP:
OFF
LOW
SPD ADJ :
+0
% [-50 - +50]
°F [-20 - +20]
TMP ADJ :
+0.0
(ADJUSTABLE OWN SENSOR ONLY.)
OWN SENSOR
OWN SENSOR
TEMPERATURE
SPEED
°F
0.0 kt
/
: TO SELECT ITEM.
-/+
TO SET CONDITION.
:
Eliminates noise from other echo sounders and electrical
interference.
Selects colors for echoes and background.
Adjusts the gain of 50 kHz (or 200 kHz) frequency. Changing
this setting by 10 is equal to changing the GAIN control by 1.
If the sensitivity is too low or the auto function does not work
properly when the transducer is installed inside the hull, try to
adjust the gain here.
Eliminates blue dots, which are mainly caused by unclean
water, from the screen.
Turns the zoom marker on/off.
Selects which marker to use; VRM or white marker.
Select YES to go to the system menu.
(* SYSTEM MENU [3] *)
MENU :
RANGE1 :
RANGE2 :
RANGE3 :
RANGE4 :
HIGH
RANGE5 :
RANGE6 :
RANGE7 :
RANGE8 :
ZOOM RANGE:
B/L RANGE:
/
: TO SELECT ITEM.
-/+
TO SET CONDITION.
:
Description
[1] [2] [3]
15
(10 - 1000)
30
60
120
200
400
600
1000
X2 X3 X4 X5
10 20
2-11
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
