IKEA Cooker Hood User Manual

Cooker hood

Advertisement

Use and Maintenance Handbook
GB
It also contains instructions and rules for safe installation.
Before installing or using the hood, carefully read and follow the instructions given in this
handbook and in the enclosed installation handbook.
WARNING: Respect the minimum installation distance from burners, indicated in the installation
handbook.
If the installation instructions for the gas cooker specify a greater distance, this must be taken into
account.
5019 618 33090/A
LI243A

Advertisement

Table of Contents
loading

Summary of Contents for IKEA Cooker Hood

  • Page 1 Use and Maintenance Handbook It also contains instructions and rules for safe installation. Before installing or using the hood, carefully read and follow the instructions given in this handbook and in the enclosed installation handbook. WARNING: Respect the minimum installation distance from burners, indicated in the installation handbook.
  • Page 2: Safeguarding The Environment

    5. The electrical components must no longer be accessible appliances using gas or other fuels. to the user after installation. 6. Do not touch the hood with wet parts of the body or use it when barefoot. 7. Do not pull the appliance power cable to unplug it.
  • Page 3: Electrical Connection

    The mains voltage must match that given on the rating plate Before calling the After-Sales Service located inside the hood. If provided with a plug, connect the 1. Check to see if you can fix the problem yourself hood to a socket complying with the current regulations and (see “Troubleshooting Guide”).
  • Page 4: Extractor Version

    The hood is designed for use in “Extractor version” or in “Filter version” Extractor version (see symbol in the installation handbook) Fumes are extracted and expelled to the outside through an exhaust pipe (not supplied) fixed to the hood coupling ring.
  • Page 5: Product Sheet

    4. Steam deflector 5. Telescopic flue Fig. 1 Warning! The hood can support a maximum weight of 5 kg Bulb maintenance 1. Disconnect the hood from the power supply. 2. Use a small screwdriver or another suitable tool to prise and remove the lighting unit (Fig.1).
  • Page 6 5019 618 33090/A LI243A...
  • Page 7 5019 618 33090/A LI243A...
  • Page 8 5019 618 33090/A LI243A...

Table of Contents