Table of Contents
Advertisement
Start time
Before a programme begins, the number of
hours the programme start must be delayed
(start time) may be specified.
m Set the programme selector control to the
desired programme. The warning light
start
d
-washQ
«
shows the time remaining.
m Press the "W" button. The screen shows 0
h" ( =hour).
m Press the "W" button once more to select the
required start time.
! The start time may be programmed in blocks
of 1 hour. The start may be delayed up to 24
hours. If a start time has been programmed
to 24 hours, it can be returned to 0 h" by
pressing the "W" button once more.
Audible signal - depending on the model
The
audible signal indicates the button
activation/deactivation, the individual status of
the programme (for instance start or end) or
errors in the operation.
Signals for the extra function and screen
buttons
m Turn the programme selector to «
Start
m Press the «
programme selector to «Cottons y».Hold
Start
M» button down until the signal is
the «
heard.
The
selected
memorised.
m Turn the programme selector once more to
Off
«
».
When the extra functions start, a long signal is
heard. When an extra function is turned off, the
audible signal is a short one.
m This function may be deactivated in the same
way as it is started.
» flashes. The screen
Off
».
M» button and turn the
adjustment
The start time begins to run after pressing the
Start
M» button. The cursor which is between
«
the number and the "h" and the pilot lights
Start
M» and «
«
the start time finishes and the programme
begins. These indicators then come on
continuously.
! The start count down is performed in hours.
When the time comes for starting, the
programme starts automatically and the time
remaining appears.
The start time may be modified at any time before
the programme begins.
m Press the "W" button until the required time
appears. The selected programme will not be
modified.
! If the programme is modified, the start time
will also be annulled. The screen then shows
the time remaining. If necessary, restart the
start time.
While the start time is activated, it is possible to
put laundry in or remove laundry from the
washing machine. Close the door immediately
after loading or emptying the drum.
Signals for the programme status and the
Start
M» button
«
m Turn the programme selector to «
m Turn the programme selector to «Cottons
y
», press the «
wait. You will hear how the audible signal is
activated or deactivated. Release the button
when the signal goes off. The alarm of the
Start
M» button and the programme status
«
.
is activated
is
m Turn the programme selector once more to
Off
«
».
When the programme is started by pressing the
Start
M» button, a brief audible signal will be
«
heard; when the programme is in pause, no
signal will be heard.
start
-washQ
d
» flashes until
Off
Rinse plus
K» button and
».
11
en
Hide quick links:
Advertisement
Table of Contents
