Chain Dialling; Automatic Redial/Retry; Pulse To Tone Changeover - Samsung DCS EURO SERIES 24 User Manual

Button handsets
Table of Contents

Advertisement

T E L E C O M
To redial this saved number at any time, press the SNR key or dial 17. The same line will be dialled for
you.
Note: If the Hot Keypad feature has been turned off, you must first lift the handset or press the
SPEAKER key before you begin dialling. The saved telephone number is stored in memory until you save
another. Redial does not apply to internal calls.

Chain Dialling

You can manually dial additional digits following a speed dial number or chain as many speed dial
numbers together as required.
• After the first speed dial number is answered, press the SPD key again and dial another speed number
OR manually dial additional digits following a speed dial number.

Automatic Redial/Retry

When you are making an outside call and you receive a busy signal, the system can automatically redial
the number for you. It will automatically redial at a pre-programmed interval for up to 15 attempts.
You must have a RETRY key programmed to use this feature.
• When you hear a busy signal, press the RETRY key.
The system will reserve the line and automatically redial the same number for you. You will hear the call
being made through the keyset speaker.
• When the called party answers, you can begin speaking.
Note: If you make another call, auto-redial is cancelled. To cancel a retry, lift and replace the handset.

Pulse To Tone Changeover

When making an outside call on a dial pulse line, press #. All digits dialled after the # will be sent as
tones.
FOR SAMSUNG TECHNICAL TIPS PLEASE VISIT WWW.PRPTELECOM.CO.UK

Advertisement

Table of Contents
loading

Table of Contents